![]() If you wish to reset the pipette back to factory settings, open the battery door. They are therefore preserved in the event of battery failure or removal, with the exception of time and date (see paragraph below). If you have an E4 unit with older firmware, please contact your local MT representative to upgrade your firmware.Īll user entered changes to settings on the E4 XLS, as well as Service Mode data, are saved in FLASH memory. The new E4 functions require at least firmware version 1.2 for PureSpeed™ and version 1.4 for Mode Presets and Admin mode. To order new micro-SD cards, use part# 17012587, Model PT-E4-SD. If the error message persists, or preset files are not readable, please contact Rainin Tech Support at SD cards and Upgrading older E4 models ![]() If you get an SD card error message, please confirm that the card is properly inserted into the pipette and is clean and undamaged. If the SD-card is transferred to a pipette with a different volume, existing saved presets will not show up but new presets can be saved for the different model. 200 μL single, 8 and 12 channel pipettes. Presets stored on micro-SD cards are only interchangeable between models with the same volume e.g. Model-specific Presets and Interchanging micro-SD cards If the card is inserted or removed while the pipette is powered on, a message will appear on the screen and inform about the card insertion or removal and the pipette will restart.Īfter the SD-card is inserted properly and the pipette powered on, an SD card system icon is displayed and the SD card functions like “Presets“ and “PureSpeed“ become available. ![]() Store in a clean, dry and cool environment. Do not touch the metal contacts of the card. To remove the card, use a similar tool: Push in the card until a click is heard, then release the card and the spring in the card socket will push the card out a little bit and it can be removed. an unused pipette tip) into the slot until a slight “click“ can be felt or heard. Push the card with your fingernail or a small, blunt non-conductive object (e.g. Insert the card with minimal force into the SD-card slot as shown in the figure with the metal contacts facing down. To change or insert a new SD card, remove the battery compartment door and the battery. A label under the battery door identifies the location of the SD-card. The micro-SD card is located in a small slot on the left side beneath the battery compartment (as seen from the back of the pipette). Please see below for ordering information. To upgrade older pipettes, a Rainin micro-SD Card can be purchased from Rainin or an authorized distributor. New pipettes with version 1.4 firmware will come with a Rainin micro-SD Card preinstalled. Now the new ‘Preset’ features will also use the SD card. In previous firmware versions only PureSpeed™ protocols used the micro-SD card. With the release of the Rainin E4 firmware V 1.4 the included micro-SD card will add new functionality to the pipette.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |